Carnot engine
Carnot engine is an interactive physics simulation for NEET-UG and JEE Main students, built around the thermodynamics chapter. Run the four-step cycle between two reservoirs. The enclosed area is the work. Open it in your browser, change the controls and watch the result respond. It is one of 32 GIRGIT instruments, small labs that each teach one syllabus chapter.
- Subject
- Physics
- Chapter
- Thermodynamics
- Group
- Heat and gases
Preview draft, not yet reviewed by a subject teacher. Questions are original, not past papers.
What it is
A Carnot engine is an ideal, reversible engine working between a hot reservoir at Th and a cold reservoir at Tc. In each cycle it takes in heat Qh, turns part of it into work W, and rejects the rest, Qc, to the cold reservoir. No engine working between the same two temperatures can be more efficient.
Try this
Leave Th = 600 K and Tc = 300 K. Predict which change raises the efficiency more: lifting Th from 600 K to 700 K, or lowering Tc from 300 K to 200 K. Try both on the sliders and read the efficiency η each time.
Why it happens
For the reversible cycle, η = W/Qh = 1 − Tc/Th, with T in kelvin, and Qh/Th = Qc/Tc. The cycle has two isotherms and two adiabats, and the area enclosed on the P–V graph is the net work W = Qh − Qc. Per kelvin, lowering Tc improves η by 1/Th, while raising Th improves it by Tc/Th², which is smaller because Tc is less than Th. Here that gives 66.7% against 57.1%.
Exam trap
Putting Celsius temperatures into η = 1 − Tc/Th. Always convert to kelvin first. For a source at 127 °C and a sink at 27 °C, η = 1 − 300/400 = 25%, not 1 − 27/127 = 79%.
NCERT chapter: Class 11 Physics · Thermodynamics
Test yourself
NEET-style question
In the Carnot bench Th = 600 K and Tc = 300 K. You raise only Tc to 380 K. The new efficiency is closest to
- 36.7%
- 63.3%
- 50%
- 20%
Answer: A. 36.7%
η = 1 − Tc/Th = 1 − 380/600 = 0.367, so 36.7%. Raising the cold temperature lowers the efficiency, from 50% down to 36.7%. 63.3% is the value of Tc/Th, which students sometimes give by forgetting the '1 −'.
Related instruments
- Gas in a pistonPush the piston or heat the gas; the P–V graph and speed curve follow.
- Heating curveAdd heat to ice and watch it melt and boil. The plateaus are latent heat.
- Speed distributionMolecules fill the Maxwell–Boltzmann curve; compare v mp, v avg and v rms.
- Lines of forceCarry magnets, iron and currents onto a table; filings jump when you tap.
- Magnet through a coilDrop a magnet through a coil; the induced current brakes the fall.
- Circuit tableSeries, parallel and a Wheatstone bridge, with current as moving dots.